Domotz Pro User Guide

3.1.1. Activating your Domotz Box

1) Connect the Domotz Box to the network you want to monitor, by plugging it in to the
network (router or a network switch) using the network cable provided. Plug the box
into a power source and make sure it’s ON. 


2) Wait 5 minutes while the Box is automatically provisioned with the latest software.
Please do not disconnect the Box during this phase.

3) Connect your mobile phone to the same network as the Box. Open your app and
press “Find new Agent” from the left side hamburger menu. Once the Domotz Agent is
found, you’ll be prompted to tap the “Configure” button.*

4) You’ll be prompted to Login. Insert your Domotz Pro account credentials and press
“Login” and name your Agent/Site to activate your agent.


The manual part of the configuration is done. The Domotz Agent will proceed with scanning
the network and detecting all the devices. This can take anywhere from a few up to
10 minutes, depending on how many devices there are on the network.


*Alternative Local Set-Up: If you encounter any issues with step 3 of the instructions, you can also
configure your Domotz Box by searching for the IP address of the Domotz Box on your local network.
Once you have the IP you can use any browser to go to http://<ip address>:3000 . Afterwards, continue on to step 4.

powered by tomehost