You can find all the necessary information for configuring the Domotz Box to monitor multiple VLANs or to configure the Domotz Box with a Static IP in the Network Info section of the http portal.
When you press the Edit button you will see:
Switching the DHCP toggle to Off you will be allowed to specify Static IP and non-DHCP based subnet mask, Gateway and DNS servers.
When pressing the VLAN Config button you will see the following screen which will assist you in this configuration.
For every VLAN that you want to add, you need to specify:
the Identification number of the additional VLAN
the Static IP address of the Nework Inteface of the Domotz Box on the additional VLAN
the subnet mask on the additional VLAN
Make sure that the IP Address on the additional VLAN is not in use, and it is not the *.*.*.0 of that subnet (e.g. do NOT use IP addresses like 172.16.10.0).
Devices discovered on the tagged VLANs cannot be blocked/paused through Violet - Customer Facing App (Violet Digital Support Client App) due to technical limitation to the implementation of the pausing functionality. Domotz recommends configuring the Domotz Box on the same subnet as primary interface where devices which might be blocked through Violet Digital Support Client App are expected to be.